Supervision and Examination
of Postgraduate and Graduate Students
Postgraduate Students Completed Their Ph.D. or/and Licentiate Engineering
Theses
1. Myroslav Demydyuk, Mathematical
modelling and parametric optimization in problems of dynamics of manipulation
and anthropomorphic locomotion systems. Thesis for the degree of Doctor
of Technical Sciences, Pidstryhach Institute for Applied Problems of Mechanics and
Mathematics, National Academy of Sciences of Ukraine,
L’viv, 2021, (Main supervisor and Examiner:
Viktor Berbyuk).
2. Lina Wramner, Torsional vibration absorbers in
heavy-duty truck powertrains. Simulation and analysis of multiple-mass flywheel
concepts. Thesis for the
degree of Doctor of Philosophy in Machine and Vehicle Systems, Department of Mechanics and Maritime
Sciences, Chalmers University of Technology, Göteborg,
Sweden, 2020, no. 4747, (Main supervisor and Examiner:
Viktor Berbyuk).
3. Muhammad Irfan, Modelling, failure modes prediction and
optimization of gear shifting mechanism: Application to heavy vehicle transmission systems.
Ph.D. thesis, Department of Mechanics and Maritime Sciences,
Chalmers University of Technology, Göteborg, Sweden,
2019, ISBN 978-91-7597-846-8, nr 4527, ISSN: 0346-718X, (Main supervisor and Examiner: Viktor Berbyuk).
4. Lina Wramner, Dual mass flywheels in truck powertrains. Modelling, simulations and validation. Thesis for the degree of Licentiate of
Engineering in Machine and Vehicle Systems, Department of Mechanics and Maritime Sciences,
Chalmers University of Technology, Göteborg, Sweden,
2018, no. 2018:24, (Main supervisor and Examiner: Viktor Berbyuk).
5. Siavash Shoja, Guided wave-based approach for health monitoring of composite structures: Application to wind turbine
blades. Ph.D. thesis, Department of Mechanics and Maritime
Sciences, Chalmers University of Technology, Göteborg,
Sweden, 2018, ISBN 978-91-7597-821-5, nr 4502, ISSN: 0346-718X, (Main supervisor and Examiner: Viktor Berbyuk).
6. Hans Lindell, Attenuation of hand-held machine vibrations:
Application of non-linear tuned vibration absorbers. Licentiate
Engineering Thesis, Department of Mechanics and Maritime Sciences, Chalmers
University of Technology, Göteborg, Sweden, 2017, no.
2017:10,
(Main supervisor and Examiner: Viktor Berbyuk).
7. Muhammad Irfan, Modelling and optimization of gear shifting mechanism:
Application to heavy vehicles transmission systems. Licentiate Engineering
Thesis, Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2017, no. 2017:01, ISSN 1652-8565, (Main supervisor and Examiner: Viktor Berbyuk).
8. Seyed Milad Mousavi Bideleh, Multiobjective optimization and
active control of bogie suspension, Ph.D. thesis, Department of Applied
Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2016, ISBN 978-91-7597-463-7, nr 4144, ISSN: 0346-718X, Performed within CHARMEC
(Chalmers Railway Mechanics Center of Excellence) in cooperation with
Bombardier Transportation, (Main supervisor and Examiner:
Viktor Berbyuk).
9. Siavash Shoja, Guided wave propagation in composite structures:
Application to ice detection on wind turbine blades. Licentiate
Engineering Thesis, Department of Applied Mechanics, Chalmers University of
Technology, Göteborg, Sweden, 2016, no. 2016:14, ISSN
1652-8565, (Main supervisor and Examiner: Viktor Berbyuk).
10. Saeed Asadi, Drive train system dynamics analysis. Application to
wind turbines.
Licentiate Engineering Thesis, Department of Applied Mechanics, Chalmers
University of Technology, Göteborg, Sweden, 2016, no.
2016:1, ISSN 1652-8565, (Main supervisor and Examiner:
Viktor Berbyuk).
11. Seyed Milad Mousavi Bideleh, Towards adaptive bogie design, Licentiate Engineering Thesis, Department of Applied
Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2014, no. 2014:08, ISSN 1652-8565. Performed within CHARMEC
(Chalmers Railway Mechanics Center of Excellence) in cooperation with
Bombardier Transportation, (Main supervisor and Examiner: Viktor Berbyuk).
12. Hoda Yarmohamadi, Advances in Heavy Vehicle Dynamics with Focus on
Engine Mounts and Individual Front Suspension, Ph.D. thesis,
Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2012, ISBN 978-91-7385-760-4. Performed in co-operation with Volvo Truck Corporation, Sweden, (Main supervisor and Examiner:
Viktor Berbyuk).
13. Thomas Nygårds, Washing Machine Design Optimization Based on Dynamics Modeling, Ph.D. thesis, Department of Applied
Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2011, ISBN 97-91-73-85-511-2. Performed in co-operation with ASKO Cylinda AB, Vara, Sweden, (Main supervisor and Examiner:
Viktor Berbyuk).
14. Albin Johnsson, Multi-objective optimization of railway bogie
suspension damping, Thesis for Licentiate of Engineering, Department of Applied Mechanics, Chalmers
University of Technology, Göteborg, Sweden, 2011, no
2011:01, ISBN 1652-8565. Performed within CHARMEC with financial
support from Family Ekman Research Foundation, (Main supervisor and Examiner:
Viktor Berbyuk).
15. Hoda Yarmohamadi, Towards active engine mounting systems for commercial vehicles: Modeling and analysis, Thesis for Licentiate of
Engineering, Department of
Applied Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2009, no 2009:04, ISBN 1652-8565, Performed in co-operation with
Volvo Truck Corporation, Sweden, (Main supervisor and Examiner: Viktor Berbyuk).
16. Thomas Nygårds, Modeling and
Optimization of Washing Machine Vibration Dynamics During Spinning, Thesis for
Licentiate of Engineering, Department
of Applied Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2009, no 2009:01, ISBN 1652-8565, Performed in co-operation with
ASKO Cylinda AB, Vara, Sweden, (Main supervisor and Examiner: Viktor Berbyuk).
17.
Daniel Thuresson,
Thermomechanics of Block Brakes, Ph.D. thesis,
Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2006, ISBN 91-7291-812-8, (Main supervisor: Göran Gerbert,
Co-supervisor Viktor Berbyuk; Examiner Viktor Berbyuk).
18. Göran Toth, Torque and Angle Controlled Tightening of Bolted
Joints, Ph.D. thesis,
Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2006, ISBN 91-7291-811-X, (Main supervisor: Göran Gerbert,
Co-supervisors Göran Brännare
and Viktor Berbyuk, Examiner Viktor Berbyuk).
19. Bogdan Lytwyn, Mathematical
modeling and optimization of motion of anthropomorphic locomotion systems, Ph.D. thesis, Pidstryhach Institute
for Applied Problems of Mechanics and Mathematics, National Academy of Sciences
of Ukraine, L’viv, Ukraine, 2006, (Main supervisor and Examiner: Viktor Berbyuk).
20.
Magnus Bengtsson, Quality Driven
Production of Crushed Aggregates, Thesis for the Degree of
Licentiate of Engineering, Department
of Applied Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2006, (Main supervisor: Carl Magnus Evertsson, Co-supervisor and Examiner Viktor Berbyuk).
21.
Per Svedensten, Simulation and
Optimisation of Crushing Plant Performance, Thesis for the Degree of
Licentiate of Engineering, Department
of Machine and Vehicle Systems, Chalmers University of Technology, 2004, (Main supervisor: Carl Magnus Evertsson, Co-supervisor and Examiner Viktor Berbyuk).
22. Mats Lindqvist, Wear in Cone Crusher Chambers, Ph.D. thesis, Department of Applied Mechanics, Chalmers
University of Technology, Göteborg, Sweden, 2005, (Main supervisor: Göran Gerbert,
Co-supervisors Carl Magnus Evertsson and Viktor
Berbyuk, Examiner Viktor Berbyuk).
23. Mathias
Lidberg, Design of
Optimal Control Processes for Closed-Loop Chain SCARA-Like Robots, Ph.D. thesis, Department of Machine and
Vehicle Systems, Chalmers University of Technology, Göteborg,
Sweden, 2004, (Main supervisor: Viktor
Berbyuk).
24.
Mats Lindqvist, Simulation of Wear in Cone Crushers, Thesis
for the Degree of Licentiate of Engineering, Department of Machine and Vehicle Systems, Chalmers
University of Technology, Göteborg, Sweden, 2003, (Main supervisor: Göran Gerbert,
Co-supervisors Carl Magnus Evertsson, and Viktor Berbyuk; Examiner Viktor Berbyuk).
25. Tomas Johannesson, Synchronous Belt Mechanics and Durability – An
Investigation Towards Life Prediction, Ph.D. thesis, Department of Machine and
Vehicle Systems, Chalmers University of Technology, Göteborg,
Sweden, 2003, (Main supervisor: Göran
Gerbert, Examiner Viktor Berbyuk).
26. Göran Toth, Torque and Angle Controlled Tightening Over the Yield
Point of a Screw, Thesis for the Degree of
Licentiate of Engineering, Chalmers
University of Technology, Göteborg, Sweden, 2002, (Main supervisor: Göran Gerbert,
Co-supervisor and Examiner Viktor Berbyuk).
27. Mathias Lidberg, Energy-Optimal Control of
Semi-passively Actuated SCARA-Like Robot, Thesis for the Degree of
Licentiate of Engineering, Chalmers University of Technology, 2002, (Main supervisor and Examiner: Viktor
Berbyuk).
28. Nataliya
Nishchenko, Mathematical Modelling of
Human Gate and Optimization Problems of Above-Knee prostheses Structure, Ph.D. thesis, Yuriy Fedkovych
Chernivtsi State University, Chernivtsi,
Ukraine, 1999, (Main supervisor and Examiner:
Viktor Berbyuk).
29. Ihor Zanevsky, The Methods of
Simulation and Analysis of Sports Archery Parameters, Thesis
for the degree of Doctor of Technical Sciences, Karpenko Physico-Mechanical Institute of the National Academy of
Sciences of Ukraine, L’viv, 1996, (Main supervisor
and Examiner Viktor Berbyuk).
30. Myroslav Demydyuk, Problems of Dynamics and
Control of Motion of Manipulator Robots with Flexible Links, Ph.D. thesis, M. Keldysh Institute of Applied Mathematics, Moscow, 1993, (Main supervisor and Examiner Viktor Berbyuk,
co-supervisor Leonid Akulenko).
Graduate Students Completed Their Master of Sciences Theses
1.
Anjan Nagaiah
Bhagavan, Auto tuned vibration absorber for reciprocating saw.
Vibration dynamics modelling, simulation and analysis, M.Sc. thesis 2020:27, Chalmers University
of Technology, Göteborg, Sweden, 2020. (MMSX30, 30p., 200917),
performed in cooperation with RISE IVF AB, (Examiner Viktor Berbyuk, supervisor Hans Lindell), https://hdl.handle.net/20.500.12380/301730
2.
Priyanka Mathiyalagan
and Parsia Nadafan, Wave
propagation in human tissue from high frequency vibrations, M.Sc. thesis 2019:04, Chalmers University
of Technology, Göteborg, Sweden, 2020. (MMSX30, 30p.,
200901), performed in
cooperation with RISE IVF AB, (Supervisor and Examiner Viktor Berbyuk, co-supervisors Hans Lindell, and Håkan Johansson).
3.
Johan Karlsson, Investigation of
Dynamic Friction Properties of a Dual Mass Flywheel for Commercial Vehicles. M.Sc. thesis 2018:19, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden, 2018. (MMSX30,
30p., 180530),
Supervisor
and Examiner
Viktor Berbyuk, co-supervisor Lina Wramner
(Volvo GTT).
4.
Andreas Näkne, Investigation
of feasibility of Auto Tuning Vibration Absorber, M.Sc. thesis 2018:03, Chalmers University of
Technology, Göteborg, Sweden, 2018. (MMSX30, 30p.,
180115), performed in
cooperation with Swerea IVF, (Supervisor
and Examiner
Viktor Berbyuk, co-supervisor Hans Lindell).
5.
Daniel Johansson and Kim Karlsson, Simulation
Models of Dual Mass Flywheels. M.Sc. thesis 2017:18, ISSN 1652-8557, Chalmers University of
Technology, Göteborg, Sweden, 2017. (TMEX04, 30p., 170607)), (Supervisor and Examiner Viktor Berbyuk, co-supervisors
Håkan Johansson (Chalmers) and Lina Wramner (Volvo GTT)).
6.
Gérémy Bourgois, Dual Mass Flywheel for Torsional Vibrations
Damping. Parametric study for application in heavy
vehicles. M.Sc. thesis 2016:22, ISSN 1652-8557, Chalmers University of
Technology, Göteborg, Sweden, 2016. (TMEX04, 30p.,
160603)), (Supervisor and Examiner Viktor Berbyuk, co-supervisors
Håkan Johansson (Chalmers) and Lina Wramner (Volvo GTT)).
7.
Mattias Josefsson
and Snævar Leó Grétarsson, Optimisation
of a Non-Linear Tuned Vibration Absorber in a Hand-Held Impact Machine. M.Sc. thesis 2015:19, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden,
2015. (TMEX04,
30p., 150603), performed in cooperation
with Swerea IVF, (Supervisor and Examiner Viktor Berbyuk, co-supervisor
Hans Lindell).
8.
Anoop Suryanarayana,
Engine Dynamics and Torsion
Vibration Reduction. M.Sc.
thesis 2015:20, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2015.
(TMEX04, 30p., 150603), performed in cooperation with Volvo GTT, (Supervisor
and Examiner
Viktor Berbyuk, co-supervisors Arne Andersson (Volvo GTT/ATR and Håkan Johansson(Chalmers)).
9.
Christine Ekberg and Erik
Hansson, Design and Simulation of Active and
Semi-active Cab Suspensions with Focus to Improve Ride Comfort of a Heavy Truck. M.Sc. thesis 2015:21, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden, 2015. (TMEX04, 30p., 150604),
performed in cooperation with Volvo GTT, (Supervisor
and Examiner
Viktor Berbyuk, co-supervisors Andreas Gustavsson and Anders Lindström).
10.
Joshua Christopher Squires,
Measurement System Design and Experimental Study of
Drive Train Test Rig.
M.Sc. thesis 2014:36, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2014.
(TMEX04, 30p., 140604), (Supervisor and Examiner Viktor Berbyuk, co-supervisor Håkan Johansson).
11.
Xin Ge,
Simulation of Vibrations in Electrical Machines for
Hybrid-Electrical Vehicles.
M.Sc. thesis 2014:12, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2014.
(TMEX04, 30p., 140603), performed in cooperation with Volvo GTT, (Supervisor
and Examiner
Viktor Berbyuk, co-supervisors Arne Andersson (Volvo GTT/ATR and Håkan
Johansson(Chalmers)).
12.
Alfred Nilsson and Tom Östgårdh, Ferifiering av matematisk modell för vibrationsdämpare, Chalmers University of Technology, Göteborg, Sweden, 2014, performed in cooperation
with Swerea IVF, (Supervisor and Examiner Viktor Berbyuk, co-supervisor
Hans Lindell).
13.
Sebastian Krause, Off-road
shift scheduling. M.Sc. thesis 2013:29, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2013. (TMEX04, 30p.,
130610). Performed in
cooperation with AVL Powertrain Engineering Scandinavia, (Supervisor and Examiner Viktor Berbyuk, co-supervisor Joakim Karlsson,
AVL/SE).
14.
Adrián Herrero, Towards optimization
of a high speed train bogie
primary suspension, M.Sc. thesis 2013:63, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden,
2013. (TMEX04,
30p., 130920). (Supervisor and Examiner Viktor Berbyuk).
15.
Manoj Kumar Kodaganti
Venu, Wet Clutch Modelling Techniques. Design optimization of clutches in an
automatic transmission. M.Sc. thesis 2013:28, ISSN 1652-8557, Chalmers
University of Technology, Göteborg, Sweden, 2013. (TMEX04, 30p.,
130610). Performed in
cooperation with AVL Powertrain Engineering Scandinavia, (Supervisor and Examiner Viktor Berbyuk, co-supervisor Per Rosander, AVL/SE).
16.
Muhammad Irfan, Meta Modeling
of Transmission Error for Spur, Helical and Planetary Gears for Wind Turbine
Application. Division of Dynamics, CHALMERS, Department of Mechanical
Engineering, Blekinge Institute of Technology, 2013, ( 30p., 130531), (Supervisor and Examiner Viktor Berbyuk, co-supervisor Håkan Johansson).
17.
Ana Pastor, Synchronization
processes and synchronizer mechanisms in manual transmissions. Modelling and
simulation of synchronization processes. M.Sc. thesis 2013:20, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2013. (TMEX04,
30p., 130611), (Supervisor and Examiner Viktor Berbyuk, co-supervisor Håkan Johansson).
18.
Juan Pablo Sánchez de Lara García, Wind
Turbine Database: Modelling and analysis with focus on upscaling. M.Sc.
thesis 2013:21, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2013.
(TMEX04, 30p., 130531), (Supervisor and Examiner Viktor Berbyuk, co-supervisor Håkan Johansson).
19.
Geoffrey Geldhof,
Semi-Active Vibration Dynamics Control of Multi-Cart Systems Using
Magnetorheological Damper. M.Sc. thesis 2013:21, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden,
2013. (TMEX04,
30p., 130531), (Supervisor and Examiner Viktor Berbyuk).
20.
Stephen Gabriel McCann, Design
of Experiments and Analysis for Drive Train test Rig. M.Sc. thesis 2013:30, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden,
2013. (TMEX04,
30p., 130611), (Supervisor and Examiner Viktor Berbyuk, co-supervisor Håkan Johansson).
21.
Fabio Baldo, Modeling of Load Interfaces for a Drive Train of a Wind Turbine. M.Sc. thesis 2012:10, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2012. (TMEX04,
30p., 120611). (Supervisor and Examiner Viktor Berbyuk).
22.
Muddassar Piracha and Umer Sohail, System
Simulation of Mechatranic Clutch in Automatic
Transmission Drivelines.
M.Sc. thesis 2011:15, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2011.
(TMEX04, MSc programme in
Systems, Control and Mechatronics, 30p., 110531). (Supervisor and Examiner Viktor Berbyuk).
23.
Apple
Mahmud, Optimization of Load Distribution of Washing
Machines Using Bio-inspired Computational Methods. M.Sc. thesis 2010:09,
ISSN 1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2010. (TMEX04,
30p., 100903). (Supervisor and Examiner Viktor Berbyuk).
24.
Bincheng Jiang, Modelling of Dynamics of
Driveline of Wind Station: Implementation
in LMS Image AMESim Software. M.Sc. thesis 2010:38, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2010. (TMEX04, MSc programme in Automotive Engineering, 30p., 100614).
(Supervisor and Examiner Viktor Berbyuk).
25.
Gil
Serrancoli Masferer, Optimization
of Stiffness and Damping Properties of Below-Knee prosthesis. M.Sc. thesis 2010:39, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2010. (TMEX04,
ERASMUS, 30p., 100614). (Supervisor and Examiner Viktor Berbyuk).
26.
Alberto
Merediz, Modeling of dehydration
Processes in Controlled Spinning of Washing Machines. M.Sc. thesis 2009:33, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2009. (TMEX04, MSc programme Solid and Fluid Mechanics, 30p., 090612).
(Supervisor and Examiner Viktor Berbyuk).
27.
Pablo
Rojo Guerra, Design and analysis of Novel Low-Cost Damper:
Application for Suspension System of Washing Machines. M.Sc. thesis 2009:32, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2009. (TMEX04, MSc programme Solid and Fluid Mechanics, 30p., 090612).
(Supervisor and Examiner Viktor Berbyuk).
28.
Andreas
Draganis and Carl Sandström, Comparative
Study of Numerical Methods for Optimal Control of a Biomechanical system:
Controlled Motion of a Human Leg during Swing Phase. M.Sc. thesis 2009:24, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2009. (TMEX04, MSc programme Solid and Fluid Mechanics, 30p., 090611), (Supervisor and Examiner Viktor Berbyuk, co-supervisor Håkan
Johansson).
29.
Erik
Bjerklund and Mikael Öhman, Stability
of High Speed Train under Aerodynamic Excitations. M.Sc. thesis 2009:03, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2009. (TMEX04,
MSc programme Solid and Fluid Mechanics, 30p., 090427,
(Supervisors and Examiners Viktor Berbyuk and Siniša Krajnović).
30.
Felix Göbel, A computational model of a ground vehicle with engine mounted on rigid
chassis: A tool for vibration dynamic
analysis and design parameter optimization implemented in MSC Adams View. M.Sc. thesis 2009:01, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2009. (TMEX04,
MSc programme Solid and Fluid Mechanics, 30p., 090126). (Supervisor
and Examiner Viktor Berbyuk).
31.
Walter Ragnini, Reduction of engine vibrations for
commercial vehicles: A research on optimal values of stiffness and damping for
engine mounts, M.Sc. thesis 2008:56, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2008. (MMFX04,
Progr AutEng, 30p.,080625).
(Supervisor
and Examiner Viktor Berbyuk).
32.
Jérôme Besancon, Design and Interior Arrangement of a Military Truck Armoured Cab, M.Sc. thesis 2008:48, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2008. (MMFX04,
Progr AutEng, 30p.,080515).
(Supervisor
and Examiner Viktor Berbyuk).
33.
Cihan Bayram and Mehmet Hakan Uygun, Towards Modelling of Engine Vibration Dynamics of Commercial Vehicle, M.Sc. thesis 2008:9, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2008. (MMFX04,
Progr AutEng, 30p.,080129). (Supervisor and Examiner Viktor Berbyuk).
34.
Tomas Björklund, Controller for the Simulation and Filtering of Human Arm
Motion, M.Sc.
thesis 2007:80, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2007,
(Performed in co-operation with Craft Animation and Entertainment AB, Göteborg).(MMFX03,Progr TTFYA,
30p.,080114). (Supervisor
and Examiner Viktor Berbyuk).
35.
Ibrahim Kaya Güneş, Terfenol-D Based Magnetostrictive Electric Generator
for Low Frequency Excitations, M.Sc. thesis 2007:55, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2007. (Supervisor and Examiner Viktor Berbyuk).
36.
Joakim Wåhlstrand Hansson, Optimization Methods
on Solver Parameters in Bearing Simulations, M.Sc. thesis 2007:51, ISSN 1652-8557, Chalmers
University of Technology, Göteborg, Sweden, 2007, (Performed in co-operation with SKF Engineering
Research Centre, Göteborg). (Supervisor and Examiner Viktor Berbyuk).
37.
Tim Johansson and Marcus Kvist,
Active Balancing
Control for Washing Machines, M.Sc. thesis 2007:45, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2007, (Performed in co-operation with ASKO Cylinda AB, Jung, Sweden). (Supervisor and Examiner Viktor Berbyuk).
38.
Daniel Mateu, Power Window Regulators: Wrong
Wound Cable Detection. M.Sc. thesis 2007:23, ISSN 1652-8557, Chalmers University of
Technology, Göteborg, Sweden, 2007, (Performed in co-operation with Castellón, S.A., Barcelona, Spain). (Supervisor and Examiner Viktor Berbyuk).
39.
Marcus Hällsås, Design of Active Balancing Systems to Offset
the Imbalance in Washing Machines, M.Sc. thesis 2007:21, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2007, (Performed in co-operation with EUC, Elektronik Utveckling Center i Västra
Götaland and ASKO Cylinda
AB, Jung, Sweden). (Supervisor
and Examiner Viktor Berbyuk).
40.
Serdar Guryuva and Peter Stoychev Petrov, Driveline of articulated heavy-duty trucks.
Packaging and analysis. M.Sc. thesis 2007:22, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden,
2007, (Performed in co-operation with
Volvo 3P, Göteborg). (Supervisor and Examiner Viktor Berbyuk).
41.
Birol Gönül and Sébastien Ragot, Energy dissipation in
suspension systems of a heavy truck. M.Sc. thesis 2006:98, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2006, (Performed in co-operation with Volvo 3P, Göteborg). (Supervisor and Examiner Viktor Berbyuk).
42.
Jonas Lagerberg and Johan
Rosengren, Concept
tool integration and vehicle model development. M.Sc. thesis 2006:82, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2006, (Performed in co-operation
with Volvo Car). (Supervisor
and Examiner Viktor Berbyuk).
43.
Alessandro Ferrero, Experimental study and linear modelling of Terfenol-D
based magnetostrictive electric generator. M.Sc. thesis, ISSN 1652-8557,
Chalmers University of Technology, Göteborg, Sweden,
2006; (Supervisor and Examiner
Viktor Berbyuk).
44.
Fredrik Ermund and Magnus Ermund, Design and Modelling of an Active
Balancing Device for Washing Machines, M.Sc.
thesis 2006:76, ISSN 1652-8557, Chalmers University of Technology, Göteborg, Sweden, 2006,
(Performed in co-operation with ASKO Cylinda AB,
Jung, Sweden); (Supervisor
and Examiner Viktor Berbyuk).
45.
Andreas Eriksson and Arvid Tideström, Semiaktiv Stötdämpning till Stridsfordon 90, M.Sc. thesis 2006:73, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2006, (Performed in co-operation with BAE Systems Hägglunds AB, Örnsköldsvik,
Sweden). (Supervisor
and Examiner Viktor Berbyuk).
46.
Marjan Anastasovski, Modelling of Vacuum Holding Force
in Pick-and-Place Machine, M.Sc. thesis 2006:70, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2006, (Performed in co-operation
with MYDATA Automation, Göteborg, Sweden); (Supervisor and Examiner Viktor Berbyuk).
47.
Amit Kataria, Mounting
System Design for Drive Trains of Hybrid Electrical Vehicles, M.Sc. thesis 2006:54, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2006, (Performed in co-operation with Volkswagen,
Germany). (Supervisor
and Examiner Viktor Berbyuk).
48.
Thomas Nygårds and Johan Sandgren, Towards
Modelling of Washing
Machines with Semi-Active Vibration Damping, M.Sc. thesis 2006:14, ISSN 1652-8557, Chalmers
University of Technology, Göteborg, Sweden, 2006, (Performed in co-operation with ASKO Cylinda AB, Jung, Sweden); (Supervisor and Examiner Viktor Berbyuk).
49.
Christian Andersson and Bojan Stojanovic,
Towards Modelling and Optimisation
of Semi-Active Suspension. M.Sc. thesis 2005:74, ISSN 1652-8557, Chalmers University
of Technology, Göteborg, Sweden, 2005; (Supervisor and Examiner Viktor Berbyuk).
50.
Erik Axelsson and Mattias
Olsson, Study of
steering effects. Virtual testing of front suspension of heavy trucks, M.Sc. thesis 2005:35, ISSN
1652-8557, Chalmers University of Technology, Göteborg,
Sweden, 2005, Performed in
co-operation with Volvo Truck Corporation, Göteborg,
Sweden. (Supervisor and Examiner Viktor Berbyuk).
51.
Samú Almeida Chantre Fortes, Towards Modelling of Motion of
Ground Vehicle with Active Suspension,
M.Sc. thesis, Chalmers
University of Technology, Göteborg, Sweden, 2005; (Supervisor and Examiner Viktor Berbyuk).
52.
Shamim Ahmed, Simulation
of Effect of Different Chassis Set up on Dynamic Performance a Passenger Car, M.Sc. thesis, Chalmers University of
Technology, Göteborg, Sweden, 2005, (Performed in co-operation with TÜV Automotive Gmbh,
Garching-Munich, Germany); (Supervisor and Examiner Viktor Berbyuk).
53.
Johan Krona and Eric Hatesse, Development
of a 20" ISO-Container Carrying Subframe for Rigid Vehicle, M.Sc.
thesis, Chalmers University of
Technology, Göteborg, Sweden, 2005, (Performed in co-operation with Volvo Truck Corporation, Göteborg, Sweden); (Supervisor and Examiner Viktor Berbyuk).
54.
Daniel Duran Murrieta, Interior Design of a Volume Model, M.Sc. thesis, Chalmers University of Technology, Göteborg,
Sweden, 2005, (Performed in co-operation with Saab
Automobile AB, Trollhättan, Sweden); (Supervisor and Examiner Viktor Berbyuk).
55.
Oscar Monroy and Tekin Cerci, Design of Front Cab Suspension
System for a New Generation Volvo Trucks, M.Sc. thesis, Chalmers University of Technology, Göteborg,
Sweden, 2005, (Performed in co-operation with Volvo Truck
Corporation, Göteborg, Sweden); (Supervisor and Examiner Viktor Berbyuk).
56.
Enrique Gutierrez and Julien Lemoine, Modelling and
Design of an Air-cushioned Hitch for passenger Cars, M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2005; (Supervisor and Examiner Viktor Berbyuk).
57.
Rehan Mohd and Chee Hann Hoo, Optimization of Chassis Design Parameters, Braking and
Stability Analysis of Autonomous Vehicles on Elevated Guideway M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2005; (Supervisor and Examiner Viktor Berbyuk).
58.
Andre Stamm,
Concepts for an Active Suspension for a Sport Car, M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2004, (Performed
in co-operation with Dr. Ing. H.c.
F. Porsche AG, Weissach, Germany); (Supervisor and Examiner Viktor Berbyuk).
59.
Marcelo Arcila
and Bartosz Bien, Application of Hydraulic Motor
to Drive Truck’s Steered Axles, M.Sc. thesis, Chalmers University of Technology, Göteborg,
Sweden, 2004, (Performed in co-operation with Volvo
Powertrain AB and Volvo 3P AB, Sweden); (Supervisor and Examiner Viktor Berbyuk).
60.
Jayesh Sodhani
and Jinbo Jiang, Electro-Hydraulic
Steered 2nd Front Axle, M.Sc. thesis, Chalmers University of Technology, Göteborg,
Sweden, 2004, (Performed in co-operation with Volvo Truck
Corporation, Göteborg, Sweden); (Supervisor and Examiner Viktor Berbyuk).
61.
Romain Demory,
Characterisation of the Acoustical Response of
External Gearshift System Methods, M.Sc. thesis, Chalmers University of Technology, Göteborg,
Sweden, 2004, (Performed in co-operation with Renault
S.A., Rueil-Malmaison, France); (Supervisor and Examiner Viktor Berbyuk).
62.
Behnam Kamrani,
Optimal Robot Positioning, M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2003, (Performed
in co-operation with ABB Corporate Research, Västerås,
Sweden); (Supervisor and Examiner Viktor Berbyuk).
63.
Kristian Nyberg and Abdul Rab
Ansari, Interface of MSC/Nastran with Matlab for Frame Structure Optimization, M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2003, (Performed
in co-operation with Volvo Car Corporation, Göteborg,
Sweden); (Supervisor and Examiner Viktor Berbyuk).
64.
Edgar Fernandez and Luis Spratley, Charting the Course of Volvo
Trucks’ Future Chassis Height, M.Sc. thesis, Chalmers University of Technology, Göteborg,
Sweden, 2003, (Performed in co-operation with Volvo Truck
Corporation, Göteborg, Sweden); (Supervisor and Examiner Viktor Berbyuk).
65.
Lars Johannesson,
Towards Time-Optimal path planning for Industrial
Robot IRB 340,
M.Sc. thesis, Chalmers
University of Technology, Göteborg, Sweden, 2003, (Performed in co-operation with ABB Corporate Research, Västerås, Sweden); (Supervisor and Examiner Viktor Berbyuk).
66.
Anna Larsson, Methods for Inversion of Arc Welding Process Control, M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2002, (Performed
in co-operation with ABB Corporate Research, Västerås,
Sweden); (Supervisor and Examiner Viktor Berbyuk).
67.
Hinrik Johannsson and Michele Carnaghi, Methods for Choosing Front
Suspension Geometry Based on ADAMS/Car Simulations, M.Sc. thesis, Chalmers University of Technology, Göteborg, Sweden, 2002, (Performed
in co-operation with Volvo Car Corporation, Göteborg,
Sweden). (Supervisor and Examiner Viktor Berbyuk).
Undergraduate students and ERASMUS students completed their B.Sc. or three-five
months projects
1.
Fredrik Angervall, Linn Blom, Oskar Hallberg, Rasmus
Kristensen, Lisa Lindenbaum, Klara Mattson, Sensorer i Chalmers testvindkraftverk. Kalibrering
och validering av töjningsgivare i tornet. Kandidatarbete inom mekanik och
maritima vetenskaper, (B.Sc.), 2021:02, Institutionen
för mekanik och maritima vetenskaper, Chalmers tekniska högskola, Göteborg,
Sverige, 2021; (Supervisor and Examiner Viktor Berbyuk, co-supervisor
Håkan Johansson).
2.
Marcus Alverstrand, Elin
Dufvenius Esping, Jesper Lennartsson, Oskar Malm, Emelie Svensson, Ultravibrationer i mänskliga fingrar och hur fingrar
förhåller sig till en vibrerande yta. Kandidatarbete i mekanik, (B.Sc.), 2021:06, Institutionen för mekanik och maritima
vetenskaper, Chalmers tekniska högskola, Göteborg, Sverige, 2021; in cooperation with RISE, (Supervisor
and Examiner Viktor Berbyuk, co-supervisors
Håkan Johansson and Hans Lindell).
3.
Frida Bohman, Armin Fatic, Anna-Stina
Frykholm, David Karlssom, Aspekter kring buller och vibrationer i tunga
fordons transmission. Teori, lagkrav och tekniska lösningar. Kandidatarbete i
Tillämpad mekanik, (B.Sc.), 2013:06, Institutionen
för Tillämpad mekanik, Chalmers tekniska högskola, ISSN 1654-4676,
Göteborg, Sverige, 2013; in cooperation with Volvo Group
Trucks Technology, (Supervisor
and Examiner Viktor Berbyuk, co-supervisors
Sixten Berglund, Håkan Johansson).
4.
Alain Powell, Alexander
Scott, Fredrik Larsson, Fredrik Nihlmark, Gustav
Stenberg and Hampus Jakobsen, Utbredning av akustiska
vågor i elastisk platta. Kandidatarbete i Tillämpad mekanik, (B.Sc.),
2013:01, Institutionen för Tillämpad mekanik, Chalmers tekniska högskola, ISSN 1654-4676, Göteborg, Sverige, 2013; (Supervisor
and Examiner Viktor Berbyuk, co-supervisors
Bo Peterson, Jan Möller).
5. Martin Carlsson, Emma Elofsson, Johanna Risö, David Sandelind, Virtuell design av en
testrigg för ett vindkraftverks drivlina, Kandidatarbete i Tillämpad
mekanik, (B.Sc.), 2012:05, Institutionen för
Tillämpad mekanik, Chalmers tekniska högskola, ISSN 1654-4676,
Göteborg, Sverige, 2012; (Supervisor and Examiner Viktor Berbyuk).
6. Erik Solli Hansson, Merethe Haugland, Bernhard Nowicki
Krzesiwo and Martin Holm, Vågenergiutvinning, Kandidatarbete i Tillämpad
mekanik, (B.Sc.), 2011:04, Institutionen för
Tillämpad mekanik, Chalmers tekniska högskola, ISSN 1654-4676,
Göteborg, Sverige, 2011, (Supervisor and Examiner Viktor Berbyuk).
7. Ola Brown, Erik Johansson, Oscar Lindecrantz, Daniel
Lovén-Öberg, Carl Onsjö and Kristoffer Rexmyr, Optimering av kastmaskin: En studie av dynamiska system, Kandidatarbete i
Tillämpad mekanik, (B.Sc.), 2011:01, Institutionen
för Tillämpad mekanik, Chalmers tekniska högskola, ISSN 1654-4676,
Göteborg, Sverige, 2011, (Supervisor and Examiner Viktor Berbyuk).
8. Peter Nyman, Anton Olason, Martin Olsson, Jonas Pedersen,
Johan Westman and Gabriel Östling, Modellering
av Magnetreologisk friktionsdämpare, Kandidatarbete i Tillämpad mekanik, (B.Sc.), 2008:06, Institutionen för Tillämpad mekanik,
Chalmers tekniska högskola, ISSN 1654-4676, Göteborg,
Sverige, 2008, (Supervisor and Examiner Viktor Berbyuk).
9. Daniel Holtkamp, Evaluation and Application of
Novel Sensor for Vibrating Systems, Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2008, (Supervisor and Examiner Viktor Berbyuk).
10. Holger Fuchs, Towards Nondimentional
Optrimization of Magnetostrictive
Transducer, Department
of Applied Mechanics, Chalmers
University of Technology, Göteborg, Sweden, 2008; (Supervisor and Examiner Viktor Berbyuk).
11. Gonzalo
Arroyo, Towards the Modelling of TERFENOL –D based Electric Generator, Department of Applied
Mechanics, Chalmers University
of Technology, Göteborg, Sweden, 2005; (Supervisor and Examiner Viktor Berbyuk).
12.
Maxime Vignoles
and Francois Joucla, Towards Design of Magnetostrictive Generator for Vibration-to-Electric Energy
Conversion on Helicopter, Department of Applied Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2005; (Supervisor and Examiner Viktor Berbyuk).
13. Sharafat Ali, H.S.
Tanvir Ahmed, Tiago Cardosa, Dain Engebretsen,
Amit Kataria, Efe Tunc, Rodrigo Zermeňo and Wu
Zhuqi, Different Engine Suspension
Alternatives, Department
of Applied Mechanics, Chalmers
University of Technology, Göteborg, Sweden, 2005, Performed in co-operation with Volvo Truck Corporation, Göteborg, Sweden; (Supervisor and Examiner Viktor Berbyuk).
14. Klaus-Peter Herber, Towards the Modelling of Magnetostrictive
Electric Generators, Department
of Machine and Vehicle Systems, Chalmers
University of Technology, Göteborg, Sweden, 2004; (Supervisor and Examiner Viktor Berbyuk).
15. Martin
Dombrowsky, Towards the Modelling of Magnetostrictive
Actuators, Department
of Machine and Vehicle Systems, Chalmers
University of Technology, Göteborg, Sweden, 2004; (Supervisor and Examiner Viktor Berbyuk).
16. Eric
Hatesse, Oscar Monroy, Enrique Gutierrez, Chee Hann Hoo, Tekin Cerci and Shahin
Hosseini, Development of Structure to Attach the Swap Body to
the Chassis, Department of
Machine and Vehicle Systems, Chalmers
University of Technology, Göteborg, Sweden, 2004, Performed in co-operation with Volvo Truck Corporation, Göteborg, Sweden;
(Supervisor and Examiner Viktor Berbyuk).
17. Christian
Müller, Dynamics and Optimization of Motion of Industrial
Robot IRB 2400, Department
of Machine and Vehicle Systems, Chalmers
University of Technology, Göteborg, Sweden, 2002; (Supervisor and Examiner Viktor Berbyuk).
18. Fabian Campo Cano, Energy-Optimal Control Problems
for Three Degrees of Freedom Manipulator Robot, Department of Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2001; (Supervisor and Examiner Viktor Berbyuk).
19. Frédéric
Vansteenkiste, Energy and Time-Optimal
Control Problems for Two Degrees of Freedom Manipulator Robots, Department of Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2000; (Supervisor and Examiner Viktor Berbyuk).
20. Yèble Caillot, Direct Dynamics – based Optimization
of Two Degrees of Freedom Manipulator Robots, Department of Mechanics, Chalmers University of Technology, Göteborg,
Sweden, 2000; (Supervisor and Examiner Viktor Berbyuk).
April 2023